For concrete and masonry surfaces:   

Con-Clean  is an architectural cleaner for use in construction areas, floor cleaning prior to coatings or mastics, food processing facilities, warehouses, racetracks, train stations, bus terminals, parking garages, cold storages, brick and masonry cleaning operations, and general grease removal from masonry. 

Con- Clean product can be diluted down to fit each cleaning need, dilute 2 to 1 for light cleaning jobs, use full strength for grease removal.

$ 107.50 / 5 gal bucket

$ 1,100.00 / 55 gal drum

  

Available in 55 Gallon Drums and 5 Gallon Buckets!

LOVITT'S Con- Clean is a fortified concrete and multi-purpose cleaner that is designed to clean and "etch" the surface simultaneously. Oils, dirt, efflorescence, and grime are removed. The primary use is to remove deeply penetrated oil stains and contaminated surface residue.

Product Description
LOVITT'S  Con- Clean is a fortified concrete and multipurpose cleaner that is designed to clean and prepare the surfaces of masonry for top coatings or mastics.  Oils, dirt, efflorescence, and grime are removed from masonry surfaces without harming the substrate or the environment.
 

Professional Results 
Con-Clean may be used full strength as an environmental alternative to muriatic and other acids for surface preparation and basic cleaning. Architectural surfaces are enhanced by removing the gradual build-up of atmospheric grime.
Primary Uses
  • Bricks
  • Industrial Floors
  • Gas Stations
  • Driveways
  • Stamped Concrete
  • Freezer Floors
  • Parking Garages
  • Food Service 
  • Mobile Washers
  • Concrete
  • Stone
  • Machine Shops
  • Kitchens
  • Pool Decks
  • Tile Floors
  • Auto Repair Shops
  • Engine Degreasing
  • Trucking Companies
 
Product Benefits
  • Biodegradeable
  • Easy shipping and handling
  • High alkalinity for tough to clean soils & grease
  • No-streak rinsing
  • Non-toxic
Technical Data
Test Sample
Form: Liquid A test patch is always recommended prior to cleaning architectural surfaces. Some surface damage may result from full strength application.
Color: Clear
pH: See MSDS Sheet
Weight: 8.8 lbs per gallon
Flash Point: None
Specific Gravity: See MSDS Sheet
Recommended Dilution
Packaging

A test patch is the best method to determine proper dilution rates. Full strength applications be damage architectural surfaces but may be required for hard to clean areas. For daily cleaning, the product may be diluted 1:1 or more with clean water.
  • 5 Gallon Pails
  • 55 Gallon Drums
 

Safety
Refer to Material Safety Data Sheet regarding hazards, personal protection and product disposal.

Call 1-877-966-3476 to Order!