|
|
 
Lovitt's
Deep
Bond (Deep Penetrating Sealer) is a
chemically reactive penetrating masonry sealer.
Lovitt's
Deep
Bond as a concrete sealant
outlasts and outperforms all other concrete sealant products on the
market.
Lovitt's
Deep
Bond
is not a surface sealant,
but, an internal concrete sealant.
Deep
Bond
contains a proprietary catalyst which "pursues
moisture" in concrete, and upon contact reacts with the
"free" alkali (lime) and calcium hydroxides (already in
concrete or masonry) to form a silica gel on the surface of voids
and particulate, impregnating the entire depth penetrated. This gel
hydrates into glass, turning the entire depth penetrated into a
solid mass.
This internal,
permanent seal and water barrier also hardens the
surface while increasing the compressive and flexural strength. For
a more detailed, comprehensive explanation of the many unique
benefits of using
Deep
Bond call our
office toll free at (877) 966-3476.
ADVANTAGES
Lovitt's
Deep Bond
outlasts
and outperforms all other sealants on the market.
-
Lovitt's
Deep Bond
is nontoxic.
-
Lovitt's Deep
Bond
does not alter or affect the color or texture of the treated
surface.
-
Lovitt's Deep
Bond
seals the concrete mass, which
retards penetration of grease, oils, and acids.
-
Lovitt's Deep
Bond
increases
bonding of any top coating (including paint, mastics, etc.) by
300%.
-
Lovitt's Deep
Bond
retards
pitting, dusting and rutting.
-
Lovitt's Deep
Bond
cures new concrete uniformly and resists hair
checking and spot drying.
-
Lovitt's
Deep Bond
densifies and hardens all concrete
and masonry surfaces, greatly extending the life of treated
surfaces by reducing or eliminating wear due to abrasion,
freeze-thaw and salt attack.
-
Lovitt's Deep
Bond
enables
easier removal of snow and ice.
-
Lovitt's Deep
Bond
may be painted over, and will accept
concrete topping or mastics for floor tile, etc.
-
All
Portland Cement Concrete
-
All
Concrete should be stabilized with
Lovitt's Deep
Bond
-
-
-
-
Above,
below or on grade as a slab hardener, preserving agent.
SPECIFICATIONS
Technical Details/Properties
Dilutent.....................................Use
as supplied
Freeze Temperature...................32'F
Freeze Harm.............................None
Boiling Point.............................230'F
Coverage per Gallon..................150-200 sq. ft.
Shelf Life..................................Infinite
Solvent for Clean-up..................Water
Color........................................None
Odor........................................None
Toxicity....................................None - Nontoxic
Flammability.............................None
Fumes(during treatment)............None
Organic Properties....................Negligible
Environmental Hazards..............None
Polymerized Content.................Excellent
CAUTION
Do not allow
Lovitt's Deep
Bond to remain on glass!
ETCHING OF THE GLASS WILL OCCUR.
Clean Lovitt's
Deep Bond
off of glass immediately with water to prevent etching.
LIMITATIONS
Lovitt's Deep
Bond
should never be applied if the surface temperature is below or
going to drop below freezing.
Lovitt's
Deep Bond
is not intended
to be applied over painted surfaces, nor is it intended to seal
visible cracks.
Lovitt's Deep
Bond
is best applied
to damp, moist surfaces.
Disclaimer
Lovitt's
Professional Coatings and MM Wood
Restoration and Protection believe
this information to be true to the best of our knowledge. Our
products are of the highest quality and uniform within
manufacturing tolerances.
Since no
control is exercised over product use, no warranty, expressed or
implied, is made as to the suitability of products for a
particular use or as
to the suitability of products for a particular use or as to the
effect of such
use, and on liability is assumed, directly or indirectly.
Buyers and
users are encouraged to conduct their own tests prior to
application.
Call Toll
Free
877-966-3476
For Technical Questions or to Order Products
|